S
stephen cartwright
Guest
appropriate
Fixing a bog seat
- Thread starter PTR
- Start date
- Status
zinedine
Striker
I fitted the same seat last year but prefer the old bolt through the hole with a wingnut on the back type. The advantage of those fittings is its easy to remove the seat for cleaning you just press the chrome button in the middle and lift it off. Not that I ever do.
S
stephen cartwright
Guest
in private, on victims. Don't tell anyoneFuck me, does no one use a hammer and nails anymore
Dave Herbal
Striker
Toilet seats hinges are a f***ing rubbish design like. No matter how tight you screw them together, they always work loose eventually, and then you find the wingnuts are seized onto the threaded rods.
There must be a better way to do it.
There must be a better way to do it.
PTR
Striker
It's the sticky up metal bits that are the problem!
Insulating tape was something I was thinking of, I'll give that a try ta
Last edited:
StripedPaddy
Winger
Just sit on the pewter,pal.
No seat needed.Bit cold at first but you will find that you can get better ‘torque’ on the load and even blast it out in one firm pack. Like a dunk shot as it were.
Saves on bog roll too,and leaves room for the nobb to loll at the front.
Who needs a seat.
No seat needed.Bit cold at first but you will find that you can get better ‘torque’ on the load and even blast it out in one firm pack. Like a dunk shot as it were.
Saves on bog roll too,and leaves room for the nobb to loll at the front.
Who needs a seat.
AndrewP
Striker
Ah right, if you buy a new seat you'll get new metal bits with it.
Something like this maybe
http://www.ebay.co.uk/itm/like/253137663036?ul_noapp=true
Latka Gravas
Striker
Get a bog seat where the fixings are similar to a toggle fixing, it opens up once inserted in through the hole and pulls back against the porcelain.
PTR
Striker
Again, the problem is that standard fittings aren't fitting my toilet. Someone above suggested a fix which I'll try later.
Is that like a spring loaded triangle metal fitting by any chance?
Latka Gravas
Striker
PTR
Striker
Nah, had to disassemble a cabinet last night, and will be putting it back up (in the new house) tonight.
I've ordered a rubber plug that seems to expand more - so that'll be here mid-next week, so I'll try that. Although Might just try some tape over the plug I've already bought first. Just needs to nip up and it'll be fine
PTR
Striker
Was that me anarl??
S
stephen cartwright
Guest
Can not wait for this rubber plug to arrive next week
PTR
Striker
How do you think I feel!
- Status
