Boiler problem

[Banjo]

Pressure is between 1 and 2 aye.



Taken the front cover off and can’t see a red switch. Only a little red screw on the top of pipe above the boiler.

My advice: Don’t fuck about with dangerous things you know fuck all about!

 

[Goat Eyes]

It does say in the help I posted that if it isn’t an E code then it’ll be in your handbook.

 

[pele]

Woke up to no hot water. Got a Baxter Avanta Plus. It’s showing an error message of P1.0 F2.3. Any ideas? Can’t find anything on Google and been in the Baxi customer support queue twice and not been able to speak to anyone.

@ontap Give him a minute or two and he will sort it for you.

 

[GAS Man]

Give the husband a shout, he'll sort it for you in a matter of minutes.

 

[Napoleon Dynamite]

It does say in the help I posted that if it isn’t an E code then it’ll be in your handbook.

I think he’s just ignoring your help

I’d tell him to fuck off

 

[Goat Eyes]

I think he’s just ignoring your help

I’d tell him to fuck off

Seems that way.

OP, hope your boiler falls off the wall.

 

[Ben Gardner]

Did you end up getting it fixed or replaced?

Ours is on its last legs and will need binning soon.

I've heard that INTERGAS are supposed to be the en vogue boiler these days (over BAXI)

Any experts out there that can verify or deny?

 

[Latka Gravas]

Did you end up getting it fixed or replaced?

Ours is on its last legs and will need binning soon.

I've heard that INTERGAS are supposed to be the en vogue boiler these days (over BAXI)

Any experts out there that can verify or deny?

Thowt Worcester Bosch were the best on the market?

 

[Ben Gardner]

Thowt Worcester Bosch were the best on the market?

This will come as no surprise, but I kow naff all about boilers so all these names and terms are new to me!

 

[houst69]

Woke up to no hot water. Got a Baxter Avanta Plus. It’s showing an error message of P1.0 F2.3. Any ideas? Can’t find anything on Google and been in the Baxi customer support queue twice and not been able to speak to anyone.

Have you switched it off and switched it back on? If not format the fucker

 

[Dan..Dan..Dan..Dan]

Boiler AIDS.

 

[stephen cartwright]

pressure should be around 1.5bar try topping it up a little and as said reset the boiler.

Correct

I had this problem on Monday and called a plumber I know. It was solved straight away, as you suggest

 

[anonymous]

Woke up to no hot water. Got a Baxter Avanta Plus. It’s showing an error message of P1.0 F2.3. Any ideas? Can’t find anything on Google and been in the Baxi customer support queue twice and not been able to speak to anyone.

P1.0 F2.3 are software and version codes displayed during the enabling process, the later which takes 3minutes to complete, before conducting initialization steps.