RTG Sunderland  Message Boards    
 
  • www.readytogo.net
  • www.a-love-supreme.com

  • Go Back   RTG Sunderland Message Boards > Sunderland Message Boards > SMB

    Notices

    Register and logon to remove this advert

    Closed Thread
     
    Thread Tools Display Modes
    Old 2nd February 2012, 10:41 PM   #1
    Flabb
    Winger
     
     
    Join Date: Nov 2010
    Location: Castletown
    Default Pc build help

    So i got new stuff to build a new pc. I got it all in and it was working ok, it wouldnt recognise the graphics card but there you go

    I put a new CPU cooler in and now it won't even post.

    I turn it on, it spins up for a few seconds then goes off, then after another couple of seconds it spins up and stays on, but no post beeps or anything, nothing on any screen. I've tried it with no ram, 1 ram, noting else plugged in, everything plugged in,nothing. Any ideas?

    Formatting the fucker won't work.
    __________________
    Then Wilfy and Flabb, 8 holes behind everyone else going to help. The last thing anyone would need is a pissed up wilfy and flabb coming to help. - Dendinho
    Flabb is offline  
    Old 2nd February 2012, 11:08 PM   #2
    mcgeezer
    Central Defender
     
     
    Join Date: Nov 2002
    Location: Washington
    Default Re: Pc build help

    Take it out the case mate and try it, sounds like it might be shorting out somewhere.

    How's them Mike Ashley socks gannin for ya?
    __________________
    One man's pain is another man's pleasure.
    mcgeezer is offline  
    Old 2nd February 2012, 11:18 PM   #3
    samwise
    Winger
     
     
    Join Date: Jul 2004
    Location: durham-ish
    Default Re: Pc build help

    the least you need is graphics, ram and cpu to get a screen.
    anything else can be unplugged.
    you say it booted but would not recognise the graphics card, then you changed the cpu cooler and it is acting up.
    replace the cooler and try it all out of the tower make sure not to short anything on the metal.
    if it boots ok then replace mobo leave only graphics, cpu and ram plugged in.
    take it from there.
    __________________
    aye, them were the days
    samwise is offline  
    Old 2nd February 2012, 11:38 PM   #4
    Flabb
    Winger
     
     
    Join Date: Nov 2010
    Location: Castletown
    Default Re: Pc build help

    It's got onboard graphics
    __________________
    Then Wilfy and Flabb, 8 holes behind everyone else going to help. The last thing anyone would need is a pissed up wilfy and flabb coming to help. - Dendinho
    Flabb is offline  
    Old 2nd February 2012, 11:41 PM   #5
    mini-x2
    Striker
     
     
    Join Date: Aug 2005
    Location: A higher frequency than others.
    Default Re: Pc build help

    Quote:
    Originally Posted by Flabb View Post
    It's got onboard graphics
    Aweh man save up and get herself a Mac then you can pretend that you're a real graphic designer.
    __________________
    What can I say, I'm heading for the door.
    mini-x2 is offline  
    Old 2nd February 2012, 11:44 PM   #6
    Flabb
    Winger
     
     
    Join Date: Nov 2010
    Location: Castletown
    Default Re: Pc build help

    Quote:
    Originally Posted by mini-x2 View Post
    Aweh man save up and get herself a Mac then you can pretend that you're a real graphic designer.
    Read the whole thread mini thought I'd save some cash and use my current gpu as its still decent, but it won't pick it up... I'll try taking it out of the case and see what happens. Reckon it might be the psu
    __________________
    Then Wilfy and Flabb, 8 holes behind everyone else going to help. The last thing anyone would need is a pissed up wilfy and flabb coming to help. - Dendinho
    Flabb is offline  
    Old 2nd February 2012, 11:45 PM   #7
    mini-x2
    Striker
     
     
    Join Date: Aug 2005
    Location: A higher frequency than others.
    Default Re: Pc build help

    Quote:
    Originally Posted by Flabb View Post
    Read the whole thread mini thought I'd save some cash and use my current gpu as its still decent, but it won't pick it up... I'll try taking it out of the case and see what happens. Reckon it might be the psu
    Good luck pal.
    __________________
    What can I say, I'm heading for the door.
    mini-x2 is offline  
    Old 2nd February 2012, 11:55 PM   #8
    Flabb
    Winger
     
     
    Join Date: Nov 2010
    Location: Castletown
    Default Re: Pc build help

    Cheers!

    So I took the mobo out and just connected the psu to the mobo with ram in, and the same thing happened - reckon a fault psu? This one is old like, been using it for 3 years +
    __________________
    Then Wilfy and Flabb, 8 holes behind everyone else going to help. The last thing anyone would need is a pissed up wilfy and flabb coming to help. - Dendinho
    Flabb is offline  
    Old 2nd February 2012, 11:56 PM   #9
    mini-x2
    Striker
     
     
    Join Date: Aug 2005
    Location: A higher frequency than others.
    Default Re: Pc build help

    Quote:
    Originally Posted by Flabb View Post
    Cheers!

    So I took the mobo out and just connected the psu to the mobo with ram in, and the same thing happened - reckon a fault psu? This one is old like, been using it for 3 years +
    Nee use asking me about PCs mate.
    __________________
    What can I say, I'm heading for the door.
    mini-x2 is offline  
    Old 3rd February 2012, 12:06 AM   #10
    joemcdokes
    Striker
     
     
    Join Date: Feb 2003
    Location: Washington
    Default Re: Pc build help

    Just take off what stopped it working, some things conflict, I had a sound card that made my pc boot up really slowly.

    You'll need to disable your onboard graphics in the bios for your card to work unless you already have, then I haven't got a fecking clue.
    __________________
    Standing in the foothills of greatness.
    joemcdokes is offline  
    Sponsored Links
    Closed Thread

    Bookmarks

    Thread Tools
    Display Modes

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is Off

    Forum Jump


    All times are GMT +1. The time now is 04:25 PM.


    Powered by vBulletin
    Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
    Copyright © Ready To Go 1998-2013
    Page generated in 0.09720 seconds with 12 queries

    Partially Powered By Products Found At Lampwrights.com